SPRAY FOAM ROOFING

Sustainable, renewable and seamless.

Our liquid polyurethane foam materials are fed through a proportioner which heats the two additives, mixes them and then sprays the foam onto the substrate. This completely seals out moisture due to its closed-cell structure, providing a seamless roofing membrane for your commercial building. When the application is complete, a protective elastomeric coating is applied to give the foam the needed protection from the sun's ultraviolet rays.

Prior to installation, we thoroughly inspect each roof for structural integrity, moisture content and the potential for leaks. Once installed, we are able to provide proper insulation and draining processes that exponentially extend the life of your roof.

1/8

WHY SPRAY FOAM ROOFING?

  • Highest insulating R-Value per inch of any roofing system.

  • Impact and water resistant creating unmatched durability.

  • High performance system that easily conforms to most existing roofs.

  • Quick installation that seldom requires a full tear-off of the existing roof.

  • Minimal preventative maintenance.

Years

Average roof life

percent

Energy usage reduction

SAVINGS

Annually, per square foot

SECONDS

Application cure and seal time

What We Do

v1_black.png

How We Do It

Projects

Products

Process

FAQ

Why We Do It

© 2020 by Rumsey Group

Contact Us

7617 Boeing Dr. Greensboro, NC 27409

Phone 888-233-5997

Fax 336-299-9570

  • LinkedIn
  • Facebook
  • Instagram
  • Twitter

AMERICAN

COATINGS &

INSULATION